|
Wire Straightening & Cutting-off Machines
|
 |
Home >>
Wire Straightening & Cutting-off Machines >> MechCut 2
Wire Straightening & Cutting-off Machines
MechCut 2
Introduction
The wire is drawn from the Coil Pay-off Stand through the High Speed
Rotating Spinner. The wire from the coil, which is to be straightened passes
through the oscillating spinner, which is equipped with five numbers of
quickly and easily adjustable dies. The rotating spinner is very suitable
and useful while dealing with delicate material and hard steel wire. The
length of wire to be straightened and cut can be adjusted as desired on the
scaling bar. The straightened and cut - to - length wires are collected on
the wire collector.
Features
- High speed rotating spinner for getting straight wire.
- The spinner is powered through 2.2 kW drive
- Quickly and easily adjustable dies in spinner
- After straightening wire can be cut to any length up to 1300
mm
- Requires very less maintenance
- Rigid construction
Specifications
| Model |
MechCut 2 |
| Dia of wire to be cut |
1.3 mm - 2.0 mm |
| Length of wire to be cut automatically
|
100 mm - 1300 mm |
| Straightening capacity |
30 Mtrs - 40 Mtrs/ minute
(Depending upon the diameter, the quality of wire and lengths
of cut) |
| Straightening |
Rotary Straightener |
| Feed |
By 2 Rollers |
| Cutting |
Fly cutting |
| Scaling bar |
1600 mm length |
| Power |
2.2 kW |
|
|
MechCut 6
Introduction
The wire is drawn from the Coil Pay-off Stand through the High Speed
Rotating Spinner. The wire from the coil, which is to be straightened,
passes through the oscillating spinner, which is equipped with five numbers
of quickly and easily adjustable dies. The rotating spinner is very suitable
and useful while dealing with delicate material and hard steel wire. The
length of wire to be straightened and cut can be adjusted as desired on the
scaling bar. The straightened and cut - to - length wires are collected on
the wire collector.
Features
- High speed rotating spinner for getting straight wire
- The spinner is powered through 3.7 kW drive
- Quickly and easily adjustable dies in spinner
- After straightening, wire can be cut to any length up to
2500 mm
- Requires very less maintenance
- Rigid construction
Specifications
| Model |
MechCut 6 |
| Dia of wire to be cut |
2.0 mm - 6.0 mm |
| Length of wire to be cut automatically
|
100 mm - 2500 mm |
| Straightening capacity |
40 Mtrs - 50 Mtrs/ minute
(Depending upon the diameter, the quality of wire and length of
cut) |
| Straightening |
Rotary straightener |
| Feed |
By 2 rollers |
| Cutting |
Fly cutting |
| Scaling bar |
2800 mm length |
| Power |
3.7 kW motor |
|
|
|
Wire Straightening & Cutting-off Machines |
|
